Skip to content

Planning

What happens to the timber and the chip

  • 2 min read
  • Darwin, Northern Territory
Chip and timber loaded for removal from site.
In this article
  1. Brush and small wood
  2. Timber
  3. Grindings
  4. Deciding before the day

A mature tree produces a surprising volume of material. Most of it leaves the site, and people are often surprised by how much of it did not have to.

Brush and small wood

Everything under roughly wrist thickness goes through the chipper on site and leaves in the truck. Chip is bulky, and a single mature tree produces far more of it than a garden can absorb - but if you want some, say so before the day and we will drop a load where you want it rather than taking it all away.

A wood chipper positioned on a driveway with the feed chute clear.

Timber

Larger wood is cut down to a size that can be moved and loaded out. If you want firewood, tell us the length you want it cut to and roughly how much - cutting to length as we go costs almost nothing, and coming back to do it later costs a visit.

A cleared site with mulched ground and stacked timber.
  • Not all species make good firewood, and we will tell you which you have
  • Fresh timber needs to season - usually a year or more before it burns well
  • Milling-grade logs need to be identified before cutting, not after
  • Whatever stays on site has to be stacked somewhere you can actually reach

Grindings

Stump grindings are a mix of wood and soil, and there are usually more of them than expected - a large stump can produce a small mound. They can be left as backfill in the hole, spread as a rough mulch elsewhere, or removed entirely.

One thing they are not good at is supporting a new plant. If something is going back into that ground, the grindings should come out and clean material should go in.

Deciding before the day

All of this is easier to arrange in advance than on the morning. Firewood length, whether chip stays, where a stack goes - five minutes at the quote saves a return trip.

Where each kind of material goes, and what can stay

Material
Brush and small wood
Usually
Chipped on site and taken away
Can it stay?
Yes, as chip - spread or left in a pile
Material
Timber
Usually
Cut to size and loaded out
Can it stay?
Yes, as firewood cut to the length you ask for
Material
Milling-grade logs
Usually
Identified before cutting
Can it stay?
Ask before the job, not on the day
Material
Stump grindings
Usually
Used to fill the hole or taken away
Can it stay?
Yes, but not under new turf or planting

The work this article describes:Green Waste Removal & Wood Chipping

Share article

Darwin & surrounds

Ready to make the tree safe?

Get a clear, no-obligation quote. Send the problem now and we will come back to you with a time to look at it.