Skip to content

Stump Grinding

Grinding a stump under a new driveway line

  • Deep grinding
A stump grinder working a large stump beside a driveway.

A large stump sitting directly under the line of a driveway extension, with lateral roots running beneath existing paving.

The situation

The stump had been cut low years earlier and left. A driveway extension was going straight over it, so a standard surface grind was not going to be enough.

What made it difficult

The finished surface needed a stable base, which meant taking the stump and the major laterals well below the usual depth. Water and irrigation lines ran within a metre of the stump on two sides.

The approach

Services were located and hand-exposed where they came close. The stump was ground substantially deeper than a turf-over grind, the lateral roots under the adjoining paving were followed and removed, and the void was backfilled with compactable material rather than grindings.

The outcome

The concreter had a clean, stable base with no organic material left under the slab line, and no services were touched.

Case study content is a structural placeholder until real project records and photography are supplied.

Same position, same lens

Drag the handle, or use the arrow keys.

After: the completed work at the same location.BeforeAfter
The stump before grinding and the backfilled, level ground afterwards.

From the job

Fresh grindings heaped over the worked stump.
Fresh grindings heaped over the worked stump.
The finished driveway edge, backfilled and level.
The finished driveway edge, backfilled and level.

Similar work

Darwin & surrounds

Different site, same starting point.

Send us photographs and a sentence about what is worrying you. We will tell you what it needs.